Pioneer P-30

Launch data:

Spacecraft data:

Description:

• Pioneer P-30 was almost identical to the earlier Pioneer P-3 satellite which failed, a 1 meter diameter sphere with a propulsion system mounted on the bottom giving a total length of 1.4 meters (55 inches). The mass of the structure and aluminum alloy shell was about 30 kg (65 lb) and the propulsion units roughly 90 kg (200 lb). Four solar panels, each 60×60 cm (24×24 inches) and containing 2200 solar cells in 22 100-cell nodules, extended from the sides of the spherical shell in a "paddle-wheel" configuration with a total span of about 2.7 meters (105 in). The solar panels charged nickel-cadmium batteries. Inside the shell, a large spherical hydrazine tank made up most of the volume, topped by two smaller spherical nitrogen tanks and a 90 N injection rocket to slow the spacecraft down to go into lunar orbit, which was designed to be capable of firing twice during the mission. Attached to the bottom of the sphere was a 90 N vernier rocket for mid-course propulsion and lunar orbit maneuvers which could be fired four times.
• Around the upper hemisphere of the hydrazine tank was a ring-shaped instrument platform which held the batteries in two packs, two 1.5 W UHF transmitters and diplexers, logic modules for scientific instruments, two command receivers, decoders, a buffer/amplifier, three converters, a telebit, a command box, and most of the scientific instruments. Two dipole UHF antennas protruded from the top of the sphere on either side of the injection rocket nozzle. Two dipole UHF antennas and a long VLF antenna protruded from the bottom of the sphere. The transmitters operated on a frequency of 378 megahertz.
• Thermal control was planned to be achieved by fifty small "propeller blade" devices on the surface of the sphere. The blades themselves were made of reflective material and consist of four vanes which were flush against the surface, covering a black heat-absorbing pattern painted on the sphere. A thermally sensitive coil was attached to the blades in such a way that low temperatures within the satellite would cause the coil to contract and rotate the blades and expose the heat absorbing surface, and high temperatures would cause the blades to cover the black patterns. Square heat-sink units were also mounted on the surface of the sphere to help dissipate heat from the interior.

Onboard equipment:

• The scientific instruments consisted of an ion chamber and Geiger-Mueller tubeto measure total radiation flux, a proportional radiation counter telescope to measure high energy radiation, a scintillation counter to monitor low-energy radiation, a VLF receiver for natural radio waves, a transponder to study electron density, and part of the flux-gate and search coil magnetometers mounted on the instrument platform. The micrometeorite detector and sun scanner were mounted on the sphere. The difference between the payload of Pioneer P-30 and the earlier Pioneer P-3 was the replacement of the TV facsimile system on P-3 with a scintillation spectrometer to study the Earth's (and possible lunar) radiation belts, mounted on the instrument platform, and a plasma probe mounted on the sphere to measure energy and momentum distribution of protons above a few kilovolts to study the radiation effect of solar flares. The total mass of the science package including electronics and power supply was roughly 60 kg (130 lb).
• Total cost of the mission was estimated at 9-10 million dollars.

Mission details:

• The difference between the payload of Pioneer P-30 and the earlier Pioneer P-3 was the replacement of the TV facsimile system on P-3 with a scintillation spectrometer to study the Earth's (and possible lunar) radiation belts, mounted on the instrument platform, and a plasma probe mounted on the sphere to measure energy and momentum distribution of protons above a few kilovolts to study the radiation effect of solar flares. The total mass of the science package including electronics and power supply was roughly 60 kg.

• The spacecraft was launched on an Air Force-Convair Atlas D intercontinental ballistic missile coupled to Thor-Able upper stages including a Hercules ABL solid propellant third stage. The first stage burned normally for 275 seconds, the two Atlas booster engines were jettisonned as planned after ~250 seconds. At an altitude of about 370 km the first stage separated from the second stage. When the second stage was ignited telemetry showed abnormal burning and the stage failed due to a malfunction in the oxidizer system. The vehicle was unable to achieve Earth orbit, re-entered and was believed to have come down somewhere in the Indian Ocean. Signals were returned by the payload for 1020 seconds after launch. The mission was designed to reach the Moon approximately 62 hours after launch.
• Later, on 15 November 1960, NASA announced that two objects from the Able VA payload had been found in Transvaal, South Africa.